If your bike has been through flood water, check the engine oil and the final-drive oil before you decide to start it. Milky white oil means water is mixed in and it has to come out. If the bike stalled in the water, or the water reached the air filter, the exhaust or the engine, do not restart it — switch off and push it to dry ground.
This follows the advice Thai Honda has published through the press. Treat it as a starting point, not a diagnosis. A bike that was submerged, or that behaves oddly, should go to a mechanic.
1. How water gets into the oil
The two types of bike take water in differently.
| Type | Where water can get in |
|---|---|
| Manual (chain-drive) | Through the air filter and the exhaust, into the engine and then the engine oil |
| Automatic scooter (A.T.) | The same routes, plus the belt housing and the low-mounted final drive |
Thai Honda gives separate steps for A.T. bikes and chain-drive bikes. For A.T. it says to drain both the engine oil and the rear gear (final-drive) oil; the chain-drive steps name only the engine oil.
Motorcycle media report that the CVT belt housing of a scooter has air vents, so water and mud can get in if the flood reaches that height and make the belt slip, and that the final drive has a breather water can enter as well. This comes from the press, not from an owner’s manual. Ask your dealer where these are on your model.
2. Stop first — do not start it
Thai Honda says do not switch on or start the engine right away after recovering a submerged bike, because it can cause serious engine damage, and if the bike stalled while crossing water, starting it again can add to the damage.
- Switch off. Do not restart, and do not kick-start.
- Push it to somewhere dry and safe.
- If the air filter or exhaust went under, assume water may be in the engine until it has been checked.
3. What to do once the water drops, in order
Thai Honda’s steps for A.T. bikes:
- Do not switch on or start.
- Wash the body and the under-seat storage to remove mud.
- Drain the engine oil and the final-drive oil and look at the colour. If it is milky white, Thai Honda says to clean the system with a flushing fluid.
- Remove the exhaust and the air filter, inspect and clean them, and replace if needed.
- Blow the combustion chamber and spark plug dry with air.
- Check the electrical system and engine before starting.
Steps 3–6 mean taking several parts off. If you are not comfortable with that, take it to a dealer or a mechanic you trust.
The Zoomer-X owner’s manual describes its air filter as a wet-paper type. It says not to clean it with compressed air — replace it only, at a Honda service point — and it has an air-cleaner drain tube it wants checked more often when riding in rain. See Zoomer-X. For other models, read that model’s manual.
4. How to tell whether the oil is milky
| Where | How | What to watch for |
|---|---|---|
| Engine oil | Pull the dipstick, or look at the filler cap/dipstick (per your manual) | Milky white = water in the engine |
| Final-drive oil | Needs the drain bolt loosened — easier to let a mechanic do it | Cloudy white or iced-tea colour = water mixed in |
Motorcycle media compare water-contaminated oil to iced tea or milk; Thai Honda says “milky white”.
- Clear, normal colour does not guarantee it is safe. If water reached the engine or the air filter, carry on with step 3, and if unsure have a mechanic check before starting.
- Milky → drain it, and do not start the engine again.
5. Do you have to change the oil?
- Milky oil → yes, change it.
- Not milky, but the bike was submerged or stalled in water → have a mechanic check it before starting and ask whether to change the oil anyway. A scooter takes less than 1 litre of engine oil per change, so changing it as a precaution costs little. If you only crossed shallow water and are unsure, ask your dealer.
- A.T. scooters → do not forget the final drive. It is a separate oil from the engine oil. See scooter final-drive oil.
Sample data from the Thai manuals of two models:
| Model | Engine oil | Final drive (quantity) | Final-drive change |
|---|---|---|---|
| Click-i 110 | 10W-30, JASO MB, 0.7 L | 0.10 L | Every 2 years |
| Zoomer-X 110 | 10W-30, JASO MB, 0.7 L | 0.14 L | Every 2 years |
Neither manual states the type or viscosity of the final-drive oil. Ask a Honda dealer before you choose one. The Click-i manual prints no model year, so later versions may differ.
6. Choosing engine oil after the flood
For scooters whose clutch does not sit in the engine oil, both Honda manuals call for JASO MB and say not to use oil labelled “Energy Conserving”. See motorcycle oil and JASO and, for grades, scooter engine oil.
- Grade → as in the manual (10W-30 for both models above).
- Standard → JASO MB for dry-clutch scooters.
- Quantity → 0.7 L per change. An 0.8 L bottle covers one change; buy extra if you may need to drain twice.
The engine oils listed below carry JASO MB on the label, but some are 10W-40, not the 10W-30 these two manuals specify. Check the grade in your own manual first.
7. When to take it to a mechanic
- The bike stalled in the water, or was fully submerged — before starting.
- Milky engine or final-drive oil that comes with unusual noise.
- A scooter whose revs rise but does not move, or shudders on take-off — the press links this to a slipping belt after water gets into the belt housing.
- Electrical or brake problems after the water drops. Thai Honda also checks the electrical system and brakes.
The press warns that if the belt slips and you keep twisting the throttle, the belt or pulley can be damaged. If the bike starts to slip or shake, stop and have it checked.
Quick summary
- After a flood, do not start it before checking — especially if it stalled in the water.
- Milky oil = water in it. Drain it: engine oil, plus final-drive oil on A.T. bikes.
- A.T. bikes need the final drive checked too — it is separate from the engine oil.
- Take off and inspect the air filter and exhaust, and blow the combustion chamber and spark plug dry.
- Choose oil by the manual — these two Honda scooters use 10W-30 JASO MB.
- If unsure, ask the dealer rather than guess.
See products in motorcycle oil
